Shaving Cutters
Shaper Cutters
Master Gears
Spline Gauges
Spline Mandrels
Broach Sharpening Machines

   Contact Us
Spline Mandrels
Spline mandrels are essential accessories for machining and inspection operations like turning, milling gear cutting etc. for production of splined components, where close relation is required to be maintained with internal spline profiles. Solid spline mandrels are manufactured to meet the requirement of various engineering industries.
Key Parameters:
Essential accessories for machining and inspection operations.
Solid spline mandrels meet the requirements of Engg. Industries.
Range : max profile length 200 mm, max. total length 280 mm., min. taper per 10 mm, on involute / st. splines 0.01 mm
Material : SAE O1/O2
  • Taper Serration Drift
  • Taper Serration Plug Gauge
  • Quenching Plugs

Taper serrations in components like Pitman-Arm are produced by broaching followed by taper serration drifting using precision taper serration drifts.

Taper serrations in components can be inspected by taper serration plug gauges manufactured by MATS.

Components which require good dimensional control on spline profile after heat treatment must use quenching plugs which are fitted in internal splines.

Taper serrations drifts are supplied from HCHCr(D2) and Taper Serration plug gauge & quenching plugs are supplied  from OHNS.

Optimised For 1024 x 768 and above resolution. Copyright © MATS. All Rights Reserved.