|
|
|
|
|
|
|
 |
Spline Gauges |
|
|
Spline Gauges are the best inspection tools to check
external and internal splines. This system is an advantage over earlier
cumbersome methods of checking spline dimensions. The use of spline gauges
not only ensure the quickest process for acceptance of splined components in
mass production units but also eliminates the need for skilled hands to
inspect the profiles. For the accreditation of ISO 9000 standard by
industry, use of spline gauges has become necessary and unavoidable for
foolproof and fast inspection procedure for the products.
MATS is an established manufacturer of spline gauges with the requisite
close accuracies. MATS gauges substitute import of spline gauges.
Spline gauges are broadly grouped on functional basis to check internal or
external splines or serrations.
Spline or serration plug gauges to check internal spline or
serration dimensions: - These gauges are supplied in sets of ‘GO’ and ‘NO
GO’.
‘GO’ spline plug gauge checks effective dimension arrived after
consideration of manufacturing tolerance and error allowance on elements
like profile, index & PCD runout.
‘NO GO’ spline plug gauge is a sector type of gauge and is designed for
checking separately individual elements such as major dia., or space width.
For checking minor dia. of internal splines, plain ‘GO’ and ‘NO GO’ gauges
are only used.
Involute Spline and Serration Ring Gauges to check external spline
or serration dimension:- These gauges are supplied in sets of
‘GO’ and ‘NO GO’.
‘GO’ involute spline or serration ring gauge checks effective dimension
arrived after consideration of manufacturing tolerance and error allowance
on elements like profile, index & PCD runout.
‘NO GO’ involute spline or serration ring gauge is a sector type of gauge
and is designed for checking separately individual elements such as major
dia., or space width.
‘GO’ cross-cut ring gauge checks external straight spline dimensions. This
checks effective spline width dimension, which is arrived after
consideration of manufacturing tolerance and error allowance on elements
like profile, index and PCD runout. This can also be combined with checking
of major dia. of spline shaft.
‘NO GO’ cross-cut spline ring gauge is a sector type of gauge and is
designed for checking separately individual elements such as root dia., or
space width.
For checking minor dia. of spline shaft, cross cut ring gauge, similar to
the one with relieved splines, is used..
|
|
Key Parameters:
|
For quick & accurate inspection of Internal &
External spline.
Spline or Serration Plug Gauges to check internal spline or serration
dimensions – GO & NO GO types.
Range: dia 6 mm to max 180 mm with 60 mm profile length.
Spline & Serration Ring Gauges to check external splines or serration
dimensions – GO & NO GO types.
Range: dia. 19 mm-dia 130 mm with 25mm profile length.
Quality Standard : Involute Spline ANSI B 92.1-1970.
Material: SAE O1/O2 for high stability.
|
|
|
|
|
|
|
|
|
|
|
|
|